Sewer Line Replacement Costs and Methods

Sewer lines are a vital system of your business, home, and the community where you live. Thus, any major repair or system replacement will have a big impact on the area. Many factors can affect the cost of replacing a sewer line. These include the materials used, length of required pipe for the job, and the method to be used in replacing the lines.


Sewer Line Replacement Methods, Costs, and Pros & Cons

Traditional Sewer Line Replacement Method

The traditional method of replacing a sewer line may be as simple as requiring the use of only a shovel. On the other hand, it can be very complicated, and may require the use of trenchers, backhoes, and other heavy equipment for digging the affected pipes, and then replacing them.

Any method that involves the use of heavy equipment is invasive. It can affect drive and walkways, lawns, fence lines, and landscaping in homes around the area where repair work is being done.

The cost to replace a sewer line using the traditional method is lower compared to the cost involved using the modern trenchless method of replacing a sewer line. But, it is more destructive and more labor-intensive than the modern method.

Trenchless Sewer Line Replacement Method

The initial cost to replace a sewer line using the trenchless method may be higher. But, it is minimally invasive, requires less time to complete, and involves the use of quality materials that can last for more than 50 years. It requires only 1 or 2 holes for installation. Thus, if your home is near the area where repair work is ongoing, you don’t have to worry about your landscaping, lawn, walkway, driveway, or any other area in your property being affected.

Materials Used for Trenchless Repairs

Compared to traditional sewer line replacement methods, a trenchless repair may cost more. But, it has more advantages. Also, the cost difference will be minimal if you factor in the cost to replace or repair affected landscaping, lawns, driveways, and walkways.

One material that makes it possible to have trenchless line replacements is the CIPP, or cured-in-place-pipe. It utilizes long cloth socks for lining the damaged sewer line, then infusing it with resin. When the resin sets in place, it hardens, and results in a brand-new pipe.

Applications that use CIPP include lateral lining, lateral reinstatement, and municipal pipe lining. You can push or pull the material into place. The number of access points the plumber or technician should make to change the pipe will depend on the method used.

Another material used for trenchless line repairs is the pipe bursting material. It is often used as a last resort, or when other methods have been used but failed.

Pipe bursting offers the advantage of having your sewer line replaced and of increasing the pipe’s diameter. This results to better volume flow. This is the perfect solution if you have a growing requirement for your property. You get what you need without having to install additional lines.

The sewer line replacement method is possible due to the material’s special splitting head. While being installed, it blasts the existing pipe out of its way. A new pipe attached to the splitting head’s back is then moved into place.

The method involves making two tiny holes in the ground. One is made at the entry point, while the other is made at the pipe’s end. This allows plumbing technicians to replace long pipe sections in a virtually seamless manner without having to tear up big sections of your property.


For more information on sewer line replacement methods and costs, or for any other plumbing concerns, Call Spartan Plumbing, Heating & Cooling t (520) 617-1000.

Tips on How to Maintain a Central Heating System

Home Heating System Annual Maintenance Checklist to Follow

A central heating system makes the winter bearable. However, many homeowners tend to take it for granted.

When a heater fails, you can hardly wash your hands or handle the water that comes out of your tap. You have to bundle up before you can sleep. The cost of emergency repairs can also stress you out. Sadly, you can’t skimp on such services.

To prevent such hassles, you should get a high-quality and durable heater system. You should also ensure you use and maintain it properly. The following are tips on how to keep your split heating system running efficiently.

1. Check the filters.

These can affect the overall efficiency of your HVAC system. When it’s dirty and clogged with dust and debris, the AC or heater may not warm up your room temperature at all.

The good news is that it’s not all that hard to check and replace your filters. You can find online instructions to do these yourself. Your filters are usually installed at the end of the HVAC vents. When you remove the vent cover, you can already see the state your filter is in.

Replace your filters right away when they’re already dusty and worn out. Don’t go out to your hardware store just yet. It’s not a one-size-fits-all HVAC part. Write down the specifications of your filter. If you want to spend less on filters, look for disposable ones.

Inspect the filters at least once every three or four months. For your heater’s filters, replace them every month during winter. The same goes for your AC’s filters during summer. Find some additional HVAC system maintenance tips here.

2. Treat rust right away.

Your plumbing and heating system will be more prone to rusting when it’s a few years old. Brownish water coming out of your pipes can be a sign of internal corrosion. You may also spot the problem on the exposed parts of your heater.

You should do a pipe checkup in the early weeks of fall. You won’t be using your heater during those times so it would not be much of a deal if repairs need to be done on it. If you see rust, you may apply anti-corrosive treatment.

In case the rusting is extensive, you should get plumbing experts to solve the problem. This will help you save time and money. If you fix the issue on your own, you may end up creating more damage and spread the rust to other areas.

3. Brush and wipe the exposed parts.

This is the simplest way to keep dust off your filters. Before you start cleaning, make sure the main switch of your heating system is turned off.

As you clean, look for possible signs of pest infestation. Do you hear rushing sounds inside the vents? There could also be wings and droppings. Pests like rats, squirrels and wild birds may leave nasty smell. If you suspect you might have a pest problem, contact a pest solution company.

Be careful when you clean and close up your HVAC system. You do not want to have scratches and dents on your HVAC unit.

4. Flush your heater

This is one of the last maintenance tasks you should do. Some people would say this process is wasteful and expensive. However, it is necessary to clean the internal parts of your heater that you cannot reach.

It’s important for every homeowner to understand how their heating system works and to be familiar with the parts of their HVAC unit. If your installation team or service company did not properly orient you, you may ask a professional to conduct an inspection and run an assessment for you. Be present when he does this and ask to be oriented about your HVAC system.

Spartan Plumbing Heating & Cooling has professionals who are ready to assist you with your plumbing needs. They can conduct a professional inspection, maintenance, and repairs any day. They also have emergency numbers so you can call anytime you need them.

Is It Time to Replace Your Home’s Plumbing?

Without a smoothly functioning plumbing system, your home will never be able to provide you comfort. Mostly hidden from view, you probably don’t notice it much unless you encounter leaks or a clogged drain.

Thousands of dollars are spent to install plumbing in a new house, and it costs just as much to repipe an old one. We recommend Perma-Liner for new piping installations in most cases. For some repairs, you will have to shell out a few hundred dollars. But know that there will come a time when you may need to replace your home’s plumbing system.


Nothing Lasts Forever

The type of material making up the pipes used in your home’s plumbing will give you an idea when it’s almost time to replace your system. Galvanized steel and brass have life expectancies of 50 years or less, while copper, cast iron and PVC pipes can last much longer.

You may be impressed by those numbers. But, just because they can doesn’t mean they will. A lot of other things can affect the lifespan of pipes such as quality of water, insulation, and use of chemical drain cleaners. Whether the pipes are used for supply or drainage will also influence their life expectancy.

Knowing that the age of your pipes isn’t the only factor to consider whether you should repair or not, how do you decide? Should you replace your home’s plumbing?

It’s Time for a Replacement When…

The water coming out of the faucet is any color but clear. Unless you have a well system, water should be clear. If it shows any tinge of brown and is dirty, it is a sure sign that your pipes are decaying.

Clogged Drain Pipe

In addition to the fact that dirty water isn’t good for you, corroded particles carried by the water could also be deposited within other sections of the pipe. Clogs can develop and soon, you may have to deal with a burst pipe.

A plumber coming into your house becomes too common. Needing a plumber every once in a while for repair is okay. Having your plumbing system inspected by professionals once a year is a good practice. But, if you find yourself regularly calling a plumber for help, it may be best in the long run for you and your pocket to replace your plumbing.

Mold and other signs of water damage appear. Pipe and fixture leaks are unavoidable but as long as they’re detected and fixed promptly, there’s no need for you to worry.

However, most of the pipes are hidden behind walls. If you find any sign of mold growth anywhere near the plumbing, you can be certain the pipes have been leaking for some time. Wet parts of the wall or ceiling and water-stained or warped flooring also indicate that your system needs some pipe replacement.

An unpleasant smell lingers in your bathroom. Sewage smells may be caused by clogged drains or pipes. Rotten smells may be due to build-up of bacteria somewhere in your system. The smell of urine could suggest a leak at the back of your toilet.

Sometimes, you can get rid of these unpleasant smells on your own, but more often than not, they’re associated with more serious problems. Thus, you may have to replace part of your plumbing system.

You are renovating your basement, bathroom, or kitchen. It’s a good idea to replace plumbing when you’re doing some home renovation. You may think it’s an unnecessary expense, but it can actually save you money by doing two things at once.

To keep the cost down, you may opt to replace only the exposed pipes as long as no other sign of leakage is observed.

Give Us a Call

If you live in Tucson and need professionals to assess, repair, or replace your home’s plumbing system, Spartan Plumbing, Heating & Cooling is just a phone call away.

Draining the Water Heater Tank

Reasons Why You Need to Drain Your Water Tank

A water heater has an average useful life of around 13 years. Through this time, sediments like calcium, calcium carbonate, and magnesium can accumulate at the bottom of the tank.

Flushing or draining may help get rid of sediments and bacteria. It may also help extend your equipment’s lifespan and make it operate in a more efficient manner. This will save you money in the long run. Thus, you should consider performing the task regularly.

Tucson, AZ water-heater-services

Frequency of Tank Draining

According to experts, whether you are using a gas or electric water heater, you should drain your unit at least once each year, especially if you have hard water in your area. However, of the US Department of energy suggests that you flush about of quart of water from the tank every quarter as part of your regular maintenance measures, depending on the model and type of your heater.

Following these guidelines, the National Board of Boiler & Pressure Vessel Inspectors say that you need to drain a few gallons of water twice to four times every year, and more in communities with hard water. Thus, to prolong the life of your water heater and to maintain its efficiency, periodical draining, at least once each year, is a sound practice.

It’s also a good idea to consult your user’s manual and know your manufacturer’s recommendation on how frequently and how much water to drain from your equipment.

Because of the high risk of injury you could sustain from scalding water, it is best that you let licensed professionals like Spartan Plumbing handle the task for you. This is also ideal if you don’t feel comfortable doing the job on your own. After all, your safety, as well as the safety of your family, should be your top priority.

Draining the Proper Way

As mentioned, flushing your water heater tank on a regular basis is among the best ways to prolong your unit’s useful life and maintain its efficient operation.

The simple and straightforward maintenance procedure below will help get rid of any sediment build-up in your tank:

  1. Shut the water supply off – Find the valve for the cold water supply at the top of the heater, then set it to off.
  2. Turn the water heater off – If you’re using an electric heater, switch the power off at the breaker panel; just turn the unit’s thermostat knob to the “pilot” setting if you’re using a gas heater.
  3. Attach a garden hose – Locate the drain valve at the bottom of your tank and attach a garden hose. Put the hose’s other end in a bucket near a floor drain. It might be a good idea to have several buckets on hand.
  4. Turn on a hot water tap – Allow hot water from a tap nearest the heater unit to run. This will help ease the pressure from the system, while also helping you drain tank water.
  5. Open the drain valve – When the tank is completely drained, switch the cold water supply on for a little while to clear the remaining sediments. Do this step repeatedly until the water is clear.

To bring the heater back into operation, do the following steps:

  1. Turn the drain valve off
  2. Detach the hose
  3. Switch the cold water supply on to refill the tank
  4. Once cold water starts to flow from the tap, switch it off
  5. Switch on the gas valve from “pilot” position or turn on electricity back to the water heater tank
  6. Inspect the valve opening to make sure there are no leaks
  7. Additional tips from DIY

Spartan Plumbing, Heating & Cooling can assist you with all your plumbing requirements. Call us if you need help with water heater maintenance, as well as any other plumbing concerns.

Common Plumbing Problems Found by Home Inspectors

Buying and Selling a Home In Tucson, Potential Plumbing Problems

Before you buy a previously-loved home, it is important that you first have a home inspection done. Otherwise, you may miss something important that could cost you hundreds or thousands of dollars in the future.

Plumbing may not be easily visible. However, it is important to keep it in mind when conducting home inspections. Often, the biggest concerns discovered by home inspectors are drainage issues and moisture that can trigger dry rot, mold, and structural damage. Slow drains, insufficient water pressure, and visible leak stains may all indicate plumbing problems.

Remember, once the sale is done, you will be the one to shoulder all necessary repairs. Getting a professional home inspection before deciding to buy a home will help you avoid unnecessary spending on repairs.

Having said that, here are some of the most common plumbing problems encountered during inspections done by home inspectors:


Tucson Plumbing Inspections

Outdated Pipes

PE or polyethylene pipes can be used in homes, but only for turn off valves in water mains as well as in water pressure tanks. They are, however, not to legal code for home use for any other application. Make sure that there are no out of date pipes installed in the home you are planning to buy.

Galvanized Pipes

Before the 1960s, a lot of houses used galvanized pipes. These lead pipes were coated with zinc. The problem is, zinc erodes over time, and there is danger that lead may seep into your home’s water supply. These pipes should be replaced before you move in.

Pipe ObstructionsRepiping

If you are buying an older home, check if there are tree root growths that could possibly affect the pipes. Problematic or outdated systems are also common pipe issues that are detected by inspections.

Polybutylene Pipes

A kind of plastic resin, polybutylene is used in manufacturing water pipes as a cheap copper alternative from 1978 to 1995. Recent findings reveal that oxidants such as chlorine, which is present in public water supplies, can make the material brittle. This will result to micro fractures that can trigger system failure, as well as damage to personal property and the building’s structure. Because of the inherent weaknesses in PB, it is no longer accepted by the building code of both the U.S.

Broken PipesLeak Detection

A lot of things can lead to a broken pipe. For example, you may accidentally crush a drain line while parking your car or you may crack a pipe while completing a DIY project.

Corroded Pipes

Rust build up or corrosion around or inside your pipes can result to blockages or decreased water pressure and flow in the household. Thus, it is important to replace rusty pipes right away.

Read more about the types of pipes plumbers use.

Clogs in the Sewer Line

Gurgling sounds, slow draining problems, and backups are often signs of a sewer line clog. This makes it difficult to get rid of waste from your home. It can also force water to back up, leading to leaks. Tree root growth is one of the most prevalent causes of clogs. The problem will only worsen if you don’t address it right away.

Leaks in the Walls

Leaks running inside your walls are hard to spot. Often, you will only begin to suspect that they are there once you notice your water bill climbing because of the slow leaking, or when you see mildew/mold growth, or damage to your flooring and/or drywall. The best way to identify the problem is through a professional inspection of your interior.

Water Heater Problems

Water heater replacement can be quite costly. You may be experiencing early damage with the presence of the following signs:

Some of these reasons may indicate your new potential home needs a new water heater or at the very least serviced by an experienced licensed plumber.

While these problems may be common and easily detected, it is best that the job be left to the hands of professionals like Spartan Plumbing. We have trained manpower and the necessary equipment for any plumbing job.

Know When Your Garbage Disposal Is in Need of Repairs

When is it Time to Replace or Repair You Garbage Disposal

The kitchen in most homes today are filled with modern appliances that make food preparation convenient and clean. A fully functioning garbage disposal system makes sure that you get rid of all remnants of each meal. This way, your kitchen can remain clean all the time. But how can you achieve that if you have a malfunctioning garbage disposal equipment?

Having said that, here are some signs that will help you know that your garbage disposal system is in need of repairs:

Foul Smell Coming from Your Sink

If you notice a bad smell coming from the sink on a consistent basis, it may no longer be due to the dirty dishes – unless of course you allow your used dishes to pile up for a long time. Otherwise, it’s probably due to a garbage disposal problem.

Food waste may be getting trapped in the system’s disposal lines. This is sometimes difficult to address. Although flushing water into the lines may be helpful, it is not a permanent fix. To get rid of the problem once and for all, you’ll have to disassemble the equipment, remove the stuck food particles, and then put the unit back together. For a regular homeowner, this may be a difficult task. Thus, it is best to seek the help of pros like Spartan Plumbing.

Slow Draining Unit

If you have given the system enough time to run and get rid of the waste as usual, the drain line may be congested. Experts don’t recommend the use of chemical drain cleaners for your garbage disposal. For one, it will only cause damage to your equipment and you will be left with a sink filled with toxic chemicals. Instead, you can try using the time-tested vinegar and baking soda solution. If that doesn’t work, then you know it’s time to call in the experts for help.

Spartan Plumbing knows exactly how to remove the bolts, disassemble the drain trap, release the drain pipe, spot the clogs and obstructions, and clear the clog using the best and most advanced tools.

Recurrent Clogs

Modern garbage disposal systems are intended to work efficiently and smoothly. Thus, a clog can be quite frustrating, and it is a clear sign that your unit needs repairs. The extent of the necessary repairs depends on the frequency and severity of the clogging.

If clogs are only occasional, you may only need to disassemble the unit to remove the food waste. However, if you experience frequent clogging, you may need to replace your garbage disposal with a bigger unit. If your equipment is too small to handle heavy loads, this can put a stress on your unit, resulting in frequent clogs.

Constant Leaks in Your Garbage Disposal

A leak can produce disgusting and dirty puddles that can ruin your kitchen. Thus, you need to address the problem right away. Tightening the connection between your sink and appliance may solve some types of leaks. However, if the leak is serious, it may be costly to repair. Severe leaks may be beyond repair and may even require replacement.

Before buying a new unit, however, consult with Spartan Plumbing first to determine if you really need new equipment. In case you don’t need a replacement yet, they will recommend the proper solution to your problem.

Your garbage disposal system is designed to get rid of all types of messes in your kitchen but a broken garbage disposal will do the opposite. By being aware of the common garbage disposal issues, you will know when you can fix the problem on your own, and when you need to call the experts to do the job for you. Here are some additional tips to keep your disposal running efficiently.

Garbage Disposal Troubles and Common Problems

A garbage disposal device is one of the hardest-working appliances in the household. After all, it supports the most commonly used item in the house: the kitchen sink. It works in a simple manner: the motor system is equipped with rotating blades for grinding food particles and other waste that goes through the drain.

The motorized grinding machine, however, can get clogged over time. Thus, it is important that it is functioning well at all times. Having said that, here are some useful tips to keep in mind when it comes to garbage repair maintenance.

When Your Garbage Disposal Needs Repair

Over time, your garbage disposal device will suffer from the effects of wear and tear. Various kinds of problems may happen, some of which are easy to fix, but some may require training and advanced skills.

To avoid making the problem worse, do not attempt to repair the equipment if you think you are not capable of doing so. This is best left to the hands of experienced professionals like Spartan Plumbing. Having said that, here are some of the more common problems your garbage disposal may pose:


If you switch the garbage disposal on and it doesn’t start to hum, it is possible that it has overheated. Because of overfilling, the device could have tripped off on its own. The first thing you should do is check for the reset (usually red) button under the unit.

If nothing happens after you press the button, find the circuit box. Check if there is a tripped breaker. This is a simple problem you can do on your own. Calling a professional for this job will only make you spend money unnecessarily.


If your unit is humming, but it’s still not working, then the culprit may be a jam. The impellers may be stuck. For your safety, do not place your hand in the grinding chamber down into the drain to check for jams. Like everyone else, your first instinct may be to fix the problem right away by trying to reach for the stuck item and dislodging it by hand. Thus, it is important to stay calm and control your actions.

First, turn the circuit breakers to your garbage disposal off. Remove the bottom part of the housing to dislodge the jammed item from the bottom. This is an easy fix, but if you have no idea how to do it, then you better give a professional a call. It is better to spend a little money for a simple repair job than risk incurring more expensive repairs in the future.

How to Avoid Costly Garbage Disposal Repair


  • Don’t grind bones, eggshells, fibrous foods, coffee grounds, metal, and rubber in the garbage disposal unit.
  • Don’t overfill it.
  • Don’t use chemical drain cleaners for unclogging. These chemicals don’t work. You’ll only be filling your sink with toxic liquids.



  • Run cold water when using the garbage disposal.
  • Have a drain strainer to prevent blockage.
  • If some items are stuck in the device for a long time, and your sink starts to stink, grind small lemon peels with ice cubes as you run lukewarm water. This will make the smell better.

If the problem you are experiencing is neither overheating nor jamming, then it could be a more serious problem that may require replacing the unit with a new one. In this case, check the manufacturer’s warranty, and see if your unit is still covered.

While a garbage disposal unit may cost only a few hundred bucks, you also need to worry about installation. If you do not have previous experience with garbage disposal installation, it may be best for you to hire a plumbing professional for this job. Call Spartan Plumbing to schedule an appointment now.


Why Your Tap Water Stinks – Possible Problems

Is Your Tap Water or Drains Smelling Funny?

Bad-smelling tap water will make you worry if your water is safe for drinking, cooking, and washing. The foul smell may be anything from rotten eggs to chlorine. This depends on the source of the bad smell.

While most causes of stinking tap water may not pose health dangers, it is still a good idea to understand the different causes and to learn how to fix them or seek further advice and testing.

Tap Water That Smells Like Dirt, Sewage, or Rotten Eggs

A musty, rotten egg or sewer-like stench in your sink, water heater, or drain may happen if there is bacteria growth in the area. You will often experience this if you haven’t used your sink in a while. The high temperatures and humidity during summer may also cause the bad smell.

If you experience such foul odor, here’s what you should do:

When the stench is coming from your drain or sink, clean the area with a water/baking soda or water/bleach mixture with a 1:1 ratio. Pour the solution down the drain. Allow it to sit for about 20 minutes, then flush it down with water.

The stench of rotten eggs may also be due to your water heater running at low temperatures. It could also be due to the hydrogen sulfide gas present in the water. If there is hydrogen sulfide gas, you will notice the smell once the water gets in contact with certain minerals or organic matter.

The smell is common in areas with hard water. While it may not be a health hazard, it is still a good idea to have the water tested as soon as you notice the change in the smell of the water. If your water has an earthy smell, it may be due to algae blooms present in your water source.

Tap Water That Is Salty

If your water is salty, it is probably because of high sodium or chloride content in the water. It can also be due to sewage or salt water that gets into your water supply. Contact local authorities right away for testing once you observe some saltiness in your water supply. This can pose some health dangers, especially if there are people in your household on a low-sodium diet.

Regardless of the unusual smell or taste you notice, it is best that you contact your water authority, and have them test the water. If the water tests safe for consumption, then all your worries will be gone.

Tap Water That Smells Like Swimming Pool Water

If your water has the same smell as swimming pool water, the cause may be due to high chlorine content. Water sources often use chlorine as a disinfectant to treat water. Thus, the smell is common. It is also safe to drink water with a standard chlorine level content. But, you should have the water tested if you observe a stronger than usual smell. The chlorine smell will often dissipate after you run the faucet for several minutes.

Tap Water That Smells Metallic

The metallic taste or smell in your water may be due to rust in the copper lining used in the plumbing. It doesn’t pose any health risks until the level reaches 1,300 parts/billion. There are water test kits available to determine metal presence in the tap water. Just make sure to read the directions carefully before using as some kits are intended for testing different types of elements and metals. To reduce the copper taste, it may be helpful to run the tap for a minute before drinking.

Metallic-tasting water may be due to other causes like dissolved sulfate-containing metals and high levels of zinc. While both are not harmful, minerals that contain sulfate can have a mild laxative effect on you if you aren’t used to it.

Foul-smelling tap water may not necessarily be a health threat. For your peace of mind, have the water tested. If you have other plumbing concerns, contact Spartan Plumbing right away.

When Should You Consider Sewer Line Repair or Replacement?

When you should consider sewer line repair or replacement really depends on the current state of your sewer pipe line. Repairs and replacements could be needed for a lot of reasons, so here are ways to know if you need to call in the professionals.

Are your sinks draining slowly?

It’s perfectly understandable to panic when slow drains occur, because slow drains are signs that your pipes are getting blocked by something. If it’s a single drain that’s draining slowly, you can probably solve it by using your favorite unclogging method (or several of them). You’re definitely facing a bigger sewer line issue when slow drains occur throughout the house, though.

Is your toilet backing up?

Have you noticed your toilet backing up when you flush? The toilet is something you use every day, and it’s usually the first to tell you there’s a problem. If all your unclogging techniques are falling flat, there’s a good chance a sewage blockage is the culprit. Your sink and bathtub may follow suit and, once they do, you’ll know for sure you have a sewer line problem that needs your attention.

Are you noticing mold or foul odors?

Mold can’t grow in a dry environment, so mold growth can be a telltale sign of sewer line issues that increase an area’s humidity levels. However, an amazing ventilation system could hide this problem. Just because your eyes don’t see it, doesn’t mean there isn’t a problem.

If your nose tells you something’s wrong, on the other hand, you best believe it. A good sewer line should be airtight, and if you’re starting to smell something, a blockage, a crack, a burst or another sewage problem won’t be too far behind.

Are you hearing strange sounds?

Water and sewage should flow smoothly in your sewer lines, so gurgling sounds could mean there’s a problem. Your drain will gurgle for two reasons: the pipe doesn’t have the proper vents, or the pipe has a blockage. If you’re hearing the gurgling noise from pipes throughout the house, it could be a sign of blockage in the main sewer line.

Is your lawn turning unnaturally lush and green?

This sounds weird because lawns usually don’t have anything to do with your sewer lines, and vice versa. But, if you’re noticing a patch or an area that looks unnaturally lusher than the rest of your lawn, it may be because the soil beneath the area is getting fertilizer from a crack in your sewage line.

You should also be careful about large trees near your sewer lines. Large trees often have even larger root systems, and years and years of growing roots can puncture your sewer lines.

Is the sewer line near the end of its lifespan?

Residential sewer lines can last for a hundred years at most. Commercial lines can last half as long. If your home or your building has used the same sewer line for as long as the average life span of the sewer lines, it could be time to consider replacement.

Calling the pros for help

A clean and properly working plumbing system can be used for decades without problems, and keeping it that way should be high on the list of any homeowner’s priorities. Many factors can prompt for untimely replacements and repairs of sewer lines. When you should consider sewer line repair or replacement depends on how it’s been maintained throughout the years, though emergencies can happen. Whether or not you’ve decided your sewer line needs repair or replacement, pick up the phone, call Spartan Plumbing, and they’ll let you know for sure.

Check Your Water for Chlorine

Today, in the US at least, water is more readily available than ever before. However, it is still crucial to make sure that your family or clients are drinking water of the highest quality. Water treatment facilities use chlorine to get rid of bacteria and other harmful organisms. However, when used in excess, it can be a health hazard. Chlorine levels must be lowered before water comes out of the tap.

Understanding the Residuals

It requires several steps before you can treat water with a significant amount of chlorine. First is to understand the residuals, which come in different kinds. There is free chlorine, and there is chloramine.

Free chlorine is made up of hypochlorous acid, dissolved chlorine gas, and hypochlorite ions. On the other hand, chloramine is the combination of ammonia and chlorine. Many treatment plants in municipalities chlorinate but neutralize it by including ammonia to comply with EPA regulations.

The Power of Water Testing

Chloramine and chlorine may be excellent water disinfecting agents. However, they must eventually be filtered out. This is where water treatment dealers get a good opportunity to provide a solution. Because they are privy to the various uses of chemicals by municipalities, they can provide effective solutions and gain the trust of the community.

Water customers need chlorine to make sure that the water they get in their homes remains pristine despite the trip from the water plant to their home plumbing. Things like point of use (POU) devices help clean the water and get rid of the chemicals that treatment plants add.

Chlorine testing is done in two ways: through test kits and test trips. Some tests are done to check for both chloramine and free chlorine. To determine if you have chlorine or chloramine compound, simple tests can distinguish between the two, and quantify how much of each is present in your water.

The DPD system is often used. This is a specific type of test, using diethyl-p-phenylene diamine, wherein the DPD reacts instantly with free chlorine compounds, forming the red color. Potassium iodide is then added to the DPD to react with chlorine and chloramine. You get the difference between the reaction of free chlorine and the reaction of total chlorine to get the reaction of chloramine.

Health Effects of Chlorine

Water treatment facilities are doing a superb job of ensuring that American households get clean, healthy water. However, you must consider three things in the water: the added chlorine, fluoride, and plumbing-corroded metals. You don’t want to ingest these when you drink tap water. You definitely want them filtered out.

Chloramines may be harmful, but much less when ingested. You must, however, be concerned when you inhale them. Once they pass through your lungs, they quickly raise the chloramine level in your blood.

Chlorine is often used for drinking water as a disinfectant. It also helps get rid of bacteria and foul odor in swimming pools. When in the water, chlorine reacts by forming hypochlorites and hypochlorous acid. When ingested, these can be detrimental to your health.

Bladder cancer is one of the more serious conditions that may result from ingesting chlorinated water in excessive amounts. You are at high risk of contracting bladder cancer if you have been drinking chlorinated water for more than 20 years. Aside from bladder cancer, you are also at risk of developing asthmatic conditions.

Final Word

For your own safety, as well as the safety of members of your household, it is best to have your water checked for its chlorine content. You need to make sure that your water poses no short- or long-term risks. Contact Spartan Plumbing for more information about checking your water for chlorine and other plumbing concerns.